Does your room air conditioner blow lukewarm air when it is on? There are various parts that may contribute to your room air conditioner to not work properly. Here are some of the most common parts below.
You turn the knob on your gas stove and you notice the surface ignitor is making a clicking noise? This problem is something everyone has faced at some point in their life. Luckily, you can fix this clicking noise all by yourself. Continue reading
If you’ve found yourself with a washer that won’t spin, it might be due to various reasons. Here are the top parts that might be the culprit of why your washing machine is not spinning.
Direct Drive Coupling (Whirlpool/ Kenmore/ Roper/ Estate)
Many Whirlpool/Kenmore brand washing machines have a small, inexpensive direct drive motor coupling. It’s plastic and rubber and it can wear out over time, or fail under overloading conditions. This part protects your transmission from excessive loading.
Clutch (Whirlpool/ Kenmore)
The clutch connects the transmission to the inner tub. It allows the tub to spin properly. If the clutch is slipping or worn out, it must be replaced.
Water Level Switch
If the water level switch is not resetting once the water has drained, power will not be available to operate the motor during spin. Check the water level switch for proper operation.
The drive belt is a long band that connects the drive motor pulley to the transmission drive pulley. The motor moves the belt, and the belt turns the transmission pulley for the agitation and spin cycles. The belt may become loose on the pulleys, which makes it hard for the tub to spin. If you can see that the belt is worn, replace it.
The control board provides power to the motor, so if it’s faulty, the washing machine may not spin or may not work at all.
The drive block connects the inner tub to the transmission. If it wears out, the tub may not spin and will make a loud noise. The drive block is fairly easy to replace.
The transmission connects the motor to the agitator and makes it agitate. Older Whirlpool washers utilize a transmission with an electro-mechanical shifter. If the shifter becomes defective the unit may drain the water but will not spin or agitate. If there is a problem with the shifter, we recommend hiring a mechanic to fix this for you because it is a complex system.
Subscribe to our e-mail newsletter for more appliance repair help, new product news and more. Visit http://www.pcappliancerepair.com and enter your e-mail address in the subscribe box on the side.
If you have any questions, please feel free to leave a comment below!
Your garbage disposal may not be used as often as other appliances in your kitchen but it is very important to have. The garbage disposal is responsible for grinding up anything that comes in contact with it. So what do you do when your kitchen sink starts to clog and your garbage disposal stops working? Do you know how to fix it? Follow these tips for common garbage disposal repairs and how to address them. Continue reading
When your trusty washer starts to malfunction it becomes a huge inconvenience because let’s face it, we’re all too busy to hand wash our own clothes. When doing laundry we typically have the mindset that anything dirty will come out clean right?Well, unfortunately sometimes your washer can malfunction or you might be using too much detergent. In order to solve the problem, we have listed some possible reasons why your washer may be staining or ruining your clothes