Washer Has No Hot or Cold Water

Washer Has No Hot or Cold WaterA washer that is not filling with the correct water temperature of water or even no water at all, could be due to a defective part on the washer. However, it could also be due to a problem with the home’s water pressure. Here’s how to troubleshoot.

Fill Hose washer ends with washer screen

Check the Washer’s Water Inlet Fill Hoses

Over time, tiny screens on the ends of the hoses that supply water to the washer can get clogged with sediment and minerals from the water supply. The hoses can also become kinked and if made of rubber can corrode or bubble. Inspect the hoses for any defects and replace if leaking, bubbling or corroded.

Washer fill hose screens

Disconnect the hoses from the back of the washer and place the hoses in a sink or a bucket. Turn on the water to see what sort of water flow you get from the hoses. Check the Continue reading

Why Does My Washer Make A Loud Noise?

Noise during or after the spin cycle could indicate a problem with the drain pump or pump and motor assembly (depending on your model). A noisy washer can indicate something as simple as an unbalanced load or a metal buckle from clothing hitting the drum when washing, or else a more serious problem from a defective washer part. Determining the causes behind a noisy washer might take some time and some parts that are causing the noise are incredibly time-consuming to reach and replace.  Here are some things you can check and some parts that might be causing noise from your washing machine.

One simple thing you can do is run your washer without anything inside (so an empty load). This will allow you to listen to the appliance at work. It might also indicate that the problem is not with your washer, but with a particular load of laundry. However, if you do notice an unusual noise, try to take note at what part of the cycle you hear it as this might give you a clue as to what part could be causing the noise.

While your washer is off and empty, spin the tub or drum by hand. If you hear a lot of noise or there is a lot of back and forth wobbling movement, this might indicate a problem with the drum’s support parts or bearing.

Drain pump or pump and motor assembly

Noise during or after the spin cycle could indicate a problem with the drain pump or pump and motor assembly (depending on your model). The drain pump pumps the water out the machine before and during Continue reading